korean pomponazzi glass coating-usage
Posted on September 13th, 2009 by admin
Manual for 880-X Glass Coating Solution POMPONAZZI
Important Notice: Please, do not apply it in the basement, but do so when a bonnet is completely cooled under no humid circumstance. And do not apply it when the temperature of vehicle surface is hot. Apply it under the shade since the surface of a vehicle will be hotter in a place where receiving sunlight directly. It is of much easy to apply when the surface of a vehicle is cooler. This product will give you semi-permanent glass coating with only single treatment. It will be fine for being exposed to rain for 3days and for the period of 1st drying procedure after the treatment. Also, it will be fine for washing your car during the second drying procedure for 7days. Totally, it takes 10days to complete. In the event of hardly stains, you may clean with acetone within 24hours, which you can find it easily in a convenience store. It will wash out dust, bird , dirt, and all other kinds of contaminants amazingly without applying any detergent, what you need is nothing but high-pressure washing after 7 to 10days as completing all coating procedures.
1st Step: Washing by using an alkali detergent
You must remove all wax and acidic contaminants that previously remained on your vehicle. In order for complete removal of contaminants and wax (acidic elements), wash your car with a powdered detergent for washing machine use, which is strong oil-remover. If you use the coating agent without washing, it will stain due to oil. Please pay attention on this matter. Please ensure that there is not humidity and that the application takes place under complete dry conditions.
2nd Step: an undiluted coating.
Get a cloth (microfiber) ready and cut it at the size of 8cm in wide and 5cm in length and prepare several and soft cotton flannels for use in vehicle cleaning as the quality of cleaning a face. When you have finished all cloth, its time to begin. First, pore catalyst in a small capsule into the solution bottle and shake it for around 10 seconds. Gas may be generated after shaking them together. Therefore apply the mixed solution while the lid is being closed.
First, get the cloth smeared with the solution and wipe the vehicle as in the shape of a spring, rounding up and down in every nook and corner as applying the solution all over the vehicle within 5mins. After accomplished wiping, wait for 30minunites and wipe stains with normal soft cloth, then it will be completed.
(It is normal if you get a bit tight feeling on the surface as the solution getting harder. If you feel too soft or too easy to get rid of stains, then wait another 10minutes.
The total treatment takes around 1hour and around a half of a bottle can be consumed (Coating needs only once). When bubbles rise up, stop treating and use the rest on a dashboard of inside of the vehicle or other plastic areas. Do not keep the rest solution but dispose it. It is impossible to keep it since it will be hardened after mixing both the undiluted solution and catalyst.
3rd Step: Removing minor stains
The minor stains left over you have missed can be removed if you find them within 24hours. Buy acetone being used for cleaning manicure of womens fingernails in convenience store or a drug store nearby, and shake it with soft cloth and remove the rest.
▶ In case of new or less than 6month old vehicles with minor scratches, you dont need to polish since all scratches will be out of sight soon only with this amazing glass coating application. If you still need to polish due to serious scratches, please, apply it after you completely removed wax on the surface of the vehicle by means of an alkali detergent after polishing because compound, which is commonly used for polishing, contains organic wax elements.
Duration : 0:9:58
michael jackson ghost spotted again on car bonnet of a salesman in united kingdom, whilst taking pictures of his car to put on the internet, when he developed the photos he noticed michael jacksons reflection on the car bonnet made from clouds in the form of his face. 
Video with qualified BSM instructor shows you the car safety checks that you need to know for the “show me, tell me” questions on your driving test. Everything from lights to tyres. Learn to drive with BSM.
beat down, The start of killing the renault 5.
Draganflyer RC Helicopter Car bonnet takeoff/landing fly
fitting vinyl graphics : bonnet graphic
Water Sheeting on Mazda MX-5 Bonnet after a 3 stage polish and Sealant.
http://www.TributeBot.tk
go to: http://www.unstoppable4u.com .
Pilot not in full control at one point, clips car and battery runs out at end, hense the undiginfied landing